Saldana Racing Products ©

3800 N. State Road 267, Unit B | Brownsburg, Indiana 46112 | 317-852-4193

Home

Because Champions Demand the Best

Oil Tank Mounting Bracket


Description

Part #

One piece oil tank mounting bracket with clamps

OTMB 1

Oil Tank Mounting Bracket

Description

Part #

Two piece oil tank mounting bracket with clamps

OTMB 2

Oil Tank Mounting Bracket

Description

Part #

Two piece billet oil tank mounting bracket with clamps

OTMB 3

Oil Tank Mounting Bracket


Description

Part #

Oil tank mounting bracket for BRP Chassis modified cars

OTMB Mod

OT 624 One-piece oil tank

6” Round x 24” Tall


OT 626 IB One-piece oil tank

6” Round x 26” Tall

Internal breather

Returns: -16 or two -12

Pick-up:  -12 pick-up,

Vent:       -12 vent or Internal Breather


Operates with 8 quarts of oil in the system. This one piece is the lightest available.


The 1” internal breather tube exits the bottom, allowing the engine to breathe through the oil tank, which will eliminate the need for crossover tubes.


It is available in any clocking and with any combination of fittings.

Returns: -16 or two -12

Pick-up:  -12 pick-up,

Vent:       3/4” “Candy Cane” Breather                   Tube

This oil tank eliminates the need for cross over tubes. It’s breathes the engine through the tank and it comes with a K&N filter..  

It is available in any clocking and with any combination of fittings.

OT 624 CC “One -piece oil tank                      6” Round x 24” Tall

Candy cane breather

OT 624S Two-piece oil tank

6” Round x 24” Tall


OT 626S IB Two-piece oil tank

6” Round x 26” Tall

Internal breather

Returns: -16 or two -12

Pick-up:  -12 pick-up,

Vent:       -12 vent or Internal Breather


Operates with 8 quarts of oil in the system. This one piece is the lightest available.


The 1” internal breather tube exits the bottom, allowing the engine to breathe through the oil tank, which will eliminate the need for crossover tubes.


It is available in any clocking and with any combination of fittings.

This 9” diameter, 2 piece tank can be made at any height to accommodate any capacity. It features an internal breather baffle and tangent returns, which get the air out of your oil for longer engine life.

Quality machined flanges with an o-ring groove make for a positive seal. It is available in any clocking and with any combination of fittings. 1 piece tank is available.


OT 914   One-piece oil tank


OT 914S  Two-piece oil tank



Clocking